Audio-Technica – AT-VM95C – Dual Moving Magnet Turntable Cartridge |
The Audio-Technica AT-VM95C Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2″ mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required). |
Features |
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. |
Cartridge & Stylus | |
Frequency Response | 20 – 20,000 Hz |
Channel Separation | 18 dB (1 kHz) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force | 1.8 to 2.2g (2.0g standard) |
Stylus Construction | Bonded Round Shank |
Recommended Load Impedance | 47,000 Ω |
Coil Impedance | 3.3 kΩ (1 kHz) |
DC Resistance | 485 Ω |
Coil Inductance | 550 mH (1 kHz) |
Output Voltage | 4.0 mV (@ 1 kHz, 5 cm/sec) |
Output Channel Balance | 2.5 dB (1 kHz) |
Stylus Shape | Conical |
Cantilever | Aluminium Pipe |
Static Compliance | 17 x 10 – 6 cm / dyne |
Dynamic Compliance | 6.5 x 10 – 6 cm / dyne (100 Hz) |
Mounting | 1/2” centres |
Cartridge Weight | 6.1g |
Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) |
Accessories Included | Two 11 mm installation screws; Two 8 mm installation screws; Two washers |
Model | AT-VM95C |
Recommended Load Capacitance | 100-200 pF |
Replacement Stylus | AT-VMN95C |
Stylus Size | 0.6 mil |
Type | VM Stereo Dual Magnet |
Wire Used for Coil | T.P. Copper |
Reviews
There are no reviews yet