Audio Technica – AT-LP3BK Fully Automatic Belt-Drive Stereo Turntable
The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables. The balanced straight tone arm comes with a 1/2″ mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other moving magnet or moving coil cartridges of your choosing.
FEATURES:
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3,
45 RPM
- Balanced straight tone arm with hydraulically damped lift control and rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable pre-amp modes for moving magnet and moving coil cartridges
- ½” mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
- Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback coloration
- Includes 45 RPM adapter and removable hinged dust cover
Specification:
Type | Belt-drive turntable, fully automatic |
Motor | DC servo-controlled |
Speeds | 33-1/3 RPM, 45 RPM |
Turntable Platter | Die-cast aluminum |
Wow and Flutter | Less than 0.25% (WTD) @ 3 kHz (JIS) |
Signal-to-Noise Ratio | >50 dB (DIN-B) |
Output Level | Pre-amp “PHONO”: 1.5-3.6 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 129-313 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain | 36 dB nominal, RIAA equalized |
Power Supply Requirements | 220V AC, 60 Hz |
Dimensions | 434.0 mm (17.1″) W x 128.0 mm (5.0″) H x 350.0 mm (13.8″) D |
Weight | 5.2 kg (11.5 lbs.) |
Reviews
There are no reviews yet